The WiFi setting for old and new version BMW ICOM A2 is different. Please kindly read this BMW ICOM A2 USB WiFi Setup manual before you use WiFi function

*   Plug USB-WiFi adapter to the USB connector of your laptop

*   Disconnect your laptop from network, turn off all WiFi on your laptop, also do not connect the device to laptop currently.

*   Carefully check you have finish all the prepare working. Press”start” button to boot the laptop

*   Booting laptop, once confirm whether you turn off all internet or disconnect all lan cable

The DWA-131 is our USB-WiFi,no need turn off.”X” is normally, do not worry

*   Boot BMW ICOM A2 software, click WiFi for ICOM

*   You can connect the BMW Diagnostic Tool ICOM A2 interface to your car right now, wait about 20-30 mintues, the
Wlan light on device will not flash or flash slow. That means the
communication between USB WiFi and ICOM WiFi is ok

*   It’s time to click diagnosis or programming software

Click”ok”

ICOM A2+B+C Diagnostic and Programming Tool for BMW

To add a comment please login by clicking here